Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 50 or above||and get 20% off|
Please, Read All Information Below Before Placing Your Order!
Product: Liquid Crystal® (12 Color) - Low PSI
Color: Color Changing - Colors resemble shades of:
Black, Brown, Red, Yellow, Green, Blue, Purple, Pink, Yellow, Green Blue & Purple.
Effect: Heat Activated "Mood Ring" Effect - Changes Multiple Colors Between 60ºF and 90ºF
Particle Size: Low PSI Sprayable Liquid Form
Amount: 1 fl oz, 2 fl oz
Liquid Crystal® is a specialty material that changes colors multiple times within a window of activation temperatures - just like in a mood ring!
This 12 Color Liquid Crystal® will change colors resembling Black, Brown, Red, Yellow, Green, Blue, Purple, Pink, Yellow, Green Blue & Purple between the temperatures of 60ºF and 90ºF, providing a wide window of change!
This specialty material can be used on a variety of different projects, but be careful to follow the instructions listed here on the website and on the product packaging - this product can be easily damaged if used incorrectly, resulting in a project that will no longer change colors.
PLEASE READ BEFORE PURCHASING:
Liquid Crystal® (Low PSI) is specifically designed for use in Low PSI Airbrushes.
This version is for spray application only.
7-10 thin coats applied against a dry black surface is recommended. The more coats applied, the more vivid the effect!
Liquid Crystal® (Low PSI) version should NOT be diluted!
Do not mix Liquid Crystal® with any other mediums, as this can damage the color changing effect!
It should be applied directly to a dry black surface and sealed once the desired effect is achieved. Please, follow directions carefully.
Instructions for Use:
DO NOT MIX LIQUID CRYSTAL® WITH ANY OTHER MEDIUMS! This will damage the product, and you will not be able to achieve the desired effect!
Liquid Crystal® must be applied directly to a dry black surface.
Shake bottle well before use.
Spray 7-10 thin coats, drying each layer with a hair dryer or heat gun on low setting before adding the next.
Seal with a tested and approved clear coat - Clear Epoxy Resin or Model Master Enamel both work well.
Which Version of Liquid Crystal® is Best for Your Project?
Please, read over the following information to find which version will fit your needs!